C51000 Phosphor Bronze alloy possess a higher yield strength than is readily available in most cast products. Typical applications for phosphor bronze include bearings, bushings, gears, pinions, shafts, thrust washers and valve parts. C51000 Phosphor bronze can be readily brazed or soldered. Capacity for being cold worked is good.
C51000 Phosphor Bronze Conforms to specification ASTM B139
Available from inventory:
Solid Diameter Sizes: 1/8" through 5" Outside Diameter.
Special Sizes are available Made to Order from 1/2" (12mm) through 16" (407mm) in diameter or cross section thickness. Standard mill lengths are 12 feet (3.65mtrs) in length. Material is available cut to any length. Rectangles are available hot rolled or as cast saw cut from plate, milled or ground to within +/-.002" (.050mm) thickness.