ANCHOR BRONZE
& Metals, Inc.
Quality & Deliveries You Can Trust
C11000 (ETP) Electrolytic Tough Pitch Copper
CDA 110, CA11000, ASTM B187, ASTM B152, SAE J461, J463, ASM F68
Mechanical values above are typical for 1" solid diameter Hard (35%) Temper
*Hardness conversions are approximate
**Test values are nominal approximations and depend on specimen size and orientation
The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable ASTM specification references.
​
C11000 ELECTROLYTIC TOUGH PITCH (ETP) COPPER is known for its high electrical and thermal conductivity, good corrosion resistance and solderability. C11000 copper is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps, commutators and current-carrying hardware. Its inherent fabrication qualities readily permit it to be bent, soldered, drilled, peened, riveted and formed to fit almost any design specification. This copper has excellent hot workability. C11000 ETP Copper conforms to ASTM B187 for bar and ASTM B152 for plate.
