*Hardness typical  for 1" rod half hard temper

** Mechanical Properties typical  for 1" rod half hard temper

The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable ASTM specification references.

 

C36000 FREE-MACHINING BRASS is ideally suited for high-speed machining operations with its superior machinability, thread rolling and knurling characteristics. Its machinability rating of 100 is standard against which all other copper alloys are rated. It is easily soldered or brazed and has good resistance to corrosion. Typical applications included gears, pinions, plumbing ware fittings, adapters, valves, valve stems and screw machine products. C36000 Brass conforms to specification ASTM B16, SAE J461, AMS 4610

​

C36000 Brass is used for Faucet Components, Pneumatic Fittings, Fluid Connectors, Automatic Screw Machine Parts, Unions, Adapters, Screw Machine Products, Gauges, Valve Seats, Valve Trim, Valve Stems, Nozzles, Pinions and Gears.